← All guides

Virtual assistants on monthly retainers

How to Track VA Retainer Hours (+ a Rollover Policy)

Track VA retainer hours used and remaining, send a near-limit heads-up before overages, choose a clear rollover policy, and wrap up each month cleanly.

September 28, 202611 min read

Retainers are one of the best things about VA work: steady clients, predictable weeks, and less time spent finding new work. They also come with a quiet risk. Hours slip past the limit without anyone noticing, and then you either work for free or send an invoice the client didn’t expect.

Tracking fixes both. This guide covers how retainers commonly work, how to track hours used and remaining, a heads-up message to send before you hit the limit, how to choose a rollover policy, and a simple month-end routine.

How VA retainers commonly work

A retainer is an agreement where the client reserves a set amount of your time each period, usually a block of hours per month. The details vary from VA to VA, but most retainers are built from the same few parts:

  • A monthly block of hours. For example, 10, 20, or 40 hours a month.
  • A billing day. Many retainers are billed in advance, at the start of each month or on a fixed date, though some VAs bill differently.
  • What counts as retainer time. Usually client work, calls, and sometimes admin like reading briefs. Decide in advance whether short check-in messages count.
  • A time increment. Some VAs track to the minute, others round to the nearest 15 minutes. Either works as long as the client knows which you use.
  • What happens past the limit. Common options are billing extra hours at an agreed rate, pausing non-urgent work until next month, or moving the client to a bigger package.
  • What happens to unused hours. This is the rollover policy, covered in its own section below.

None of these is right or wrong. What matters is that each one is decided, written into your agreement, and recorded where you can see it every day.

Agree on the details before the first month

Most retainer friction comes from something that was never discussed. Before a new retainer starts, make sure you and the client have agreed on each of these:

  • Hours included per month
  • Billing day and when payment is due
  • What counts toward retainer hours, and what doesn’t
  • How time is rounded (exact minutes, or 15-minute blocks)
  • How hours past the limit are handled
  • The rollover policy for unused hours
  • At what point you’ll send a near-limit heads-up
  • How much notice either side gives to change or end the retainer
  • How a first month that starts mid-month is handled

If you’re unsure how to word any of this in your contract, a local professional can review it once so you can reuse it with every client.

Prorating a mid-month start

Not every client starts on the 1st. If your retainer runs on calendar months, prorate the first partial month by the share of days left.

For example, a client on a 20-hour monthly retainer starts on September 16. September has 30 days, and 15 of them remain (the 16th through the 30th), so the first month is half a month:

  • Hours for the first month: 20 × 15/30 = 10 hours
  • First invoice: half the usual monthly fee
  • From October 1: the full 20 hours and the full fee

Round the prorated hours to your usual time increment, and say in writing whether any unused prorated hours follow your rollover policy. Some VAs skip proration and start each client’s monthly cycle on their start date instead. Either works if the agreement says which.

Track hours used and hours remaining

A retainer is only predictable if you know where you stand at any point in the month, not just on the last day.

Log time as you go

Log each block of work when you finish it, not at the end of the week. Memory is generous with round numbers, and a week of estimates can drift by hours. Each entry needs:

  • Client
  • Date
  • Time spent
  • A short note on what you did, such as “Scheduled 12 Instagram posts for October”

The note matters more than it seems. When a client asks where the hours went, a list of dated, specific entries answers the question in a way a single total can’t.

You can log in a time tracker, a spreadsheet, or your own workspace. The tool is less important than the habit.

Keep four numbers visible for each client

For every retainer client, you should be able to see these at a glance:

  1. Hours included this month (plus any rolled-over hours, if your policy allows them)
  2. Hours used so far
  3. Hours remaining
  4. Days left in the month

Here’s what that might look like in the middle of a month:

Client Included Used Remaining Days left
Client A 20 9.5 10.5 14
Client B 10 8.25 1.75 14
Client C 15 4 11 14

Client B is the one to watch. With two weeks to go and under two hours left, a conversation is needed now, not later.

Check the pace, not just the total

A simple pace check helps you spot trouble early. Halfway through the month, a steady retainer would have used about half its hours. If a client is well ahead of that, look at what’s coming up. A launch or a busy season may explain it, and that’s fine, as long as the client knows. If a client is well behind, that’s worth noticing too, especially if unused hours won’t roll over.

Send a near-limit heads-up

The most useful habit in retainer work is speaking up before the limit, not after it. At 100% of the hours, the only options left are unpaid work or an unexpected bill. Earlier, the client still has real choices.

Pick a threshold

Choose a point that triggers the heads-up, such as 75% or 80% of the monthly hours, and tell clients about it during onboarding. Then it’s a routine part of how you work rather than a surprise.

Check each client against the threshold during your weekly review, and again before starting any large task. If a big task would push a client past the limit, send the heads-up before you begin.

Copyable near-limit message

Hi Priya,

A quick heads-up: we’ve used 16 of your 20 retainer hours this month, with about 10 days to go.

Still on the list are the newsletter, the podcast show notes, and the inbox cleanup. Together those will probably take around 6 hours.

A few options, whichever suits you best:

  1. I keep going, and the extra hours are billed as we agreed.
  2. I prioritize the newsletter and show notes, and move the inbox cleanup to next month.
  3. You let me know a different priority order.

Just reply with what works and I’ll carry on from there.

Thanks, [Your name]

It gives the numbers, names what’s left, and offers a few easy choices. A heads-up leaves the decision with the client; a surprise invoice doesn’t.

Copyable at-limit message

If a client reaches the limit before you’ve heard back, send a short follow-up before doing more work:

Hi Priya,

Just a note that we’ve now reached your 20 retainer hours for this month. I’ve paused the inbox cleanup for now. Let me know if you’d like me to continue as extra hours, or pick it up again on the 1st.

Thanks, [Your name]

Choose a clear rollover policy

A rollover policy decides what happens to hours the client paid for but didn’t use. It’s one of the most common sources of retainer confusion, mostly because it’s left vague. There are three common approaches, and each has trade-offs.

Option 1: No rollover

Unused hours end with the month, and every month starts fresh.

  • Why some VAs choose it: It’s the simplest to track. The client is reserving your availability, and you kept that time open whether or not they used it.
  • What to watch for: A client who regularly leaves hours unused may start to feel they’re paying for nothing. If that happens, it may be time to suggest a smaller package.

Option 2: Capped rollover

Unused hours carry into the next month, up to a limit. For example, up to 5 hours, or up to 25% of the monthly block.

  • Why some VAs choose it: It feels fair to clients with an uneven month, while the cap stops a large backlog of owed hours from building up.
  • What to watch for: You need to track rolled-over hours separately, and decide whether they’re used before or after the new month’s hours.

Option 3: Hours expire after a set number of months

Unused hours roll over, but each month’s hours expire after a set period, such as one or two months.

  • Why some VAs choose it: It gives clients flexibility across busy and quiet stretches without leaving old hours open indefinitely.
  • What to watch for: It’s the most complex to track, because you need to know which month each unused hour came from.

Write the policy in one or two sentences

Whichever option you choose, write it plainly in your agreement and repeat it in your welcome email. For example:

“Unused hours roll over to the following month, up to a maximum of 5 hours. Rolled-over hours are used first and expire at the end of that month.”

Record each client’s rollover rule where you track their hours, so you apply it the same way every month. If you have clients on different packages, their rules may differ, which is one more reason to keep them written down rather than remembered.

Wrap up each month with a summary

A short month-end routine turns your time entries into something useful for you and the client.

Month-end checklist

  • Make sure every time entry for the month is logged
  • Total hours used for each client
  • Compare against hours included, plus any rolled-over hours
  • Note any overage and bill it as agreed
  • Apply each client’s rollover rule and set next month’s starting hours
  • Send each client a month-end summary
  • Note any client who has been over or under for several months running

Copyable month-end summary

Subject: Your [month] summary

Hi Priya,

Here’s a quick look at [month]:

Hours: 18.5 of 20 used. Under our rollover policy, 1.5 hours carry into next month, so you’ll start with 21.5.

Highlights:

  • Sent 4 newsletters
  • Scheduled 24 social posts
  • Cleared and labeled the support inbox

Coming up next month:

  • Holiday launch emails
  • Podcast guest outreach

The full list of time entries is attached if you’d like the detail. Let me know if anything looks off.

Thanks, [Your name]

A regular, specific summary shows the client what the retainer bought, in their own terms, before the invoice arrives.

When a retainer keeps running over or under

One unusual month means nothing. Several in a row is a signal that the package no longer fits.

  • Consistently over: The client’s needs have grown. Suggest a larger block of hours, or agree on which tasks could move out of the retainer.
  • Consistently under: Suggest a smaller package, or ask whether there are tasks they’ve been meaning to hand off. A client who feels they’re overpaying may leave quietly, so it’s better to raise it yourself.

Either way, bring it up with the numbers from your summaries. A few months of real data makes the conversation straightforward. For more on keeping several retainer clients organized at once, see how to manage multiple clients as a virtual assistant.

One place for your retainer numbers

Tracking gets easier when hours, rollover rules, and clients live together. If retainer hours are all you need, The Retainer Hours Tracker ($9, works on the free Notion plan) shows hours used and remaining for every client, logs time in one tap, flags a client at 80%, applies your rollover policy, and includes the four messages from this guide.

For your whole VA business, The Virtual Assistant Business System ($39, works on the free Notion plan) keeps per-client retainer tracking in one place: hours used, hours left, and a near-limit flag so you can see an overage coming. Its client hub records each client’s retainer, billing day, and rollover rules, and the Home page shows every client’s retainer hours alongside today’s tasks. It also includes an invoice and income tracker (you still send invoices from your invoicing tool).

FAQ

Should I round retainer time to 15-minute blocks?

Either exact minutes or 15-minute blocks can work, as long as the client knows which you use. Watch one thing with rounding: if a client sends many two-minute requests and each is rounded up to 15 minutes, the total can climb faster than the work does. Grouping quick requests into one entry per session keeps rounding fair.

Do rolled-over hours count toward the near-limit heads-up?

Base the threshold on everything available that month, the included hours plus any rolled-over hours, and say so in the message (“16 of your 25 hours, including 5 rolled over”). That way the client sees the same number you do.

Should unused retainer hours roll over?

There’s no single right answer. Common options are no rollover, capped rollover, or hours that expire after a set number of months. If you change your policy later, tell clients in writing before it takes effect and apply it from the start of a billing month, so no month runs under two rules.

What if a client questions the hours?

Send the dated time entries for the month and offer to walk through them. Specific notes like “Scheduled 12 Instagram posts for October” show exactly where the time went. If you find a genuine mistake, correct it and say so.